CentOS中Device eth0 does not seem to be present错误解决办法

直接复制了Oracle VM VirtualBox的镜像文件vdi 可以直接创建新的系统镜像真是方便，不过遇到了
Device eth0 does not seem to be present 的问题，在网上找到遇到同样问题的解决方法,
很顺利的解决,记录之：

ifconfig…没有看到eth0.。然后重启网卡又报下面错误。

故障现象：

service network restart
Shutting down loopback insterface: [ OK ]
Bringing up loopback insterface: [ OK ]
Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]

CentOS Linux解决Device eth0 does not seem to be present

解决办法：
 
 
首先，打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示：

# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0×1022:0×2000 (pcnet32)
SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”08:00:27:7e:8c:e7″, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth0″
# PCI device 0×1022:0×2000 (pcnet32)
SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”08:00:27:30:c2:57″, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth1″

记录下，eth1网卡的mac地址08:00:27:30:c2:57

接下来，打开/etc/sysconfig/network-scripts/ifcfg-eth0

# vi /etc/sysconfig/network-scripts/ifcfg-eth0

将 DEVICE=”eth0″ 改成 DEVICE=”eth1″ ,
将 HWADDR=”08:00:27:7e:8c:e7″ 改成上面的mac地址 HWADDR=”08:00:27:30:c2:57″

最后，重启网络

# service network restart
或者

# /etc/init.d/network restart

正常了，搞定